The RemoDAQ-8000 Series is a set of intelligent sensor to computer interface modules containing built in microprocessor. They are remotely controlled through a simple set of commands issued in ASCII format and transmitted in RS-485 protocol. They provide signal conditioning, isolation, ranging, A/D and D/A conversion, data comparison, digital communication, timer/counter, wireless communication, collection AC and other functions.
Analog input module uses a microprocessor-controlled
integrating A/D converter to convert sensor voltage or current signals into digital data. The digital data is then translated into either engineering units, two’s complement hexadecimal format or percentage of full-scale range (FSR) according to the module’s configuration. When prompted by the host computer,the data is sent through a standard RS-485 interface.
Sampling Rate:10 Samples/Second
Bandwidth:15.7 Hz
Accuracy:±0.1% or better
Zero Drift:0.5μV/°C
Span Drift:25ppm/°C
CMR@50/60Hz:150dB
NMR@50/60Hz:100dB
Input Impedance:20M Ohms
Fault and over-voltage protection:With stands over-voltage up to ±35V
Isolation:3000VDC
Power Consumption:1.0W@24VDC
I/O Connector Type:10-pin plug-terminal
Environment
Operating Temperature -20 ~ 70° C
Humidity 5 ~ 95%, non-condensing
Driver
Date |
Description |
Version |
OS |
Download |
Manual
Date |
Description |
Version |
OS |
Download |
2015/04/15 |
RemoDAQ-8018 |
|
|
Download |